Monday, October 20, 2008

Don't even bother

To my loyal throng of blog followers (aka: Mom), this one may seem to lack my typical comedic wit and unparalleled gift of prose only rivaled by William Shakespeare and Judy Bloom. This will just be my boring documentation of what I did today.

I cleaned the keg out. I'm sorry for those of you who didn't get the chance to sample the Helles, it was a delight and I will miss is so. I transferred the Pale Ale into the keg. It's still quite green, but give it a few weeks and I'm sure it will be fine.

That's it. I told you it would be lame.

Saturday, October 4, 2008

A sign of good conversion

The Pale Ale has been brewed. It's trending darker though, so I may start calling it an Amber, but that's neither here nor there. So here's the recipe:



12.75 lbs Maris Otter
1 lb Munich
.75 lb Crystal (40L)
All Amarillo hops
1 oz at 60, 10 and 0 min. each
Safale S-05

Everything went pretty good except for forgetting the Whirlfloc. The beer may turn out a little hazy, but I'm pretty sure I'm not drinking it for the looks.

Typically during the mash, I can tell if I'm getting good conversion of starch to sugar when the flys start buzzing around the runoff. I can't say that I blame them for wanting to get close to that sweet, sweet beer precursor. It usually ends there when the pot goes over the flame. I don't know if you can tell from the picture, but it went a little further today than I'm used to. It was about 15 minutes into the boil and I went outside to see how it was going. To my surprise, I saw something surface in the roll of the boil and go back down. Hmm, that wasn't expected. And, there it is again. Interesting, it has wings. So, what you hopefully can see in that picture is a bee with an extreme sweet tooth. And the moral is: Dessert is delicious, boiling liquid - not so much.

Thursday, October 2, 2008

Theory to Practice

As I study for my audit exam, surrounded by mountains of textbooks, two computers and enough technical drawings and schematics to make any sane person consider a humble, simple life of living in a van down by the river, I had to take a small break for a very necessary errand. So, to the brew shop I went. The plan is to brew my pale ale, but since I was there, I asked about my keg issue. See, I'm not able to rig the type of tap that you would see at a bar, so I'm relegated to using the type of tap that you've seen at every kegger you went to in college. This poses some issues. But first, you must be warned...

WARNING: I'm about to go full nerd. My own brain is going to hurt after this, so proceed at your own risk. I wouldn't blame you for turning away.

The bar tap has a diffuser in it to drop the pressure from the keg, at about 12 pounds gage, down to the glass at atmosphere. This makes for a nice smooth pour. The party tap, however, lacks this oh so simple device which has left me with a choice. A) drop the pressure in the keg to about 2 pounds and get a perfect pour of flat beer, or B) send a beer geyser across my garage. So, at the beer store, I asked the guy for some help with a solution. Honestly, I'm a little embarrassed I didn't come up with it on my own.

If you've kept up with me this far, brace yourself. It's gonna get worse.

See, the keg needs to be kept around 12 pounds to keep the gas in solution. Everyone remember partial pressures and equilibrium from high school chemistry? Less pressure means less carbonation. I needed a way to drop the pressure a bit more smoothly than just across that party tap.

And for the peak of nerd-dom...

HEAD LOSS is inversely proportional to DIAMETER squared. Something about the Reynolds number and other crap I barely remember from college too, but this will work for now.

The beer store guy hooked me up with about six feet of 3/16" inside diameter hose. I was using 3/8" before. The pressure drop in the line is good enough to give me a carbonated beer. Victory! The Helles is flowing.

Sunday, July 27, 2008

Doppelbock

This beer should end up being the biggest, maltiest beer I've made. Plus, for the first time I'm doing what they say you should do about pitching enough yeast and controlling temperature. So here's the recipe for the five gallon batch:

14 lb Munich
4 lb Pilsner
2 lb Caramunich (60L)
2 oz Hallertau (2.4%) for 60 min.
German Bock Yeast (WLP 833)

The brew day went pretty smooth. The only regret is that I didn't cool the beer down overnight, I just pitched on top of the Helles yeast cake after I got it down as far as my chiller would take it (~80F). Which brings me to pitching on a yeast cake. I've never done that before and was a bit surprised at how it went down (or up as it were). Every other lager I've brewed took at least 5 days to get started. I'm sure it's from pitching cold on an insufficient yeast population. Here I went a little warm with plenty of yeast. 12 hours. After 12 hours I was replacing the airlock with a piece of aluminum foil so I could mop up the beer inside the fridge and clean the mung out of the bung. Please understand that whatever picture pops into your mind when you hear "bung mung" is probably spot on. It's too bad I didn't get a picture of it. Needless to say, we had a blow out.

All is fine now and I'm sure in a short six to 12 months we'll be sipping a delicious dopplebock. I'm auditioning names. It must end in "ator" and I think "Masterb..." has been done before. So let's get creative.

Saturday, July 26, 2008

Kelly Likes It!


It finally happened. After a year and a half of continually cutting back on the amount of hops in my beers, it happened. She took a sip and said with a surprised yet impressed and congradulatory look, "this is good". Well, no kidding babe, of course it's good, it might as well be creme brule. It actually did turn out decent. I'm talking about the Helles by the way. I was worried about infection for no reason at all.

My math says that this thing sat in the fermenter for about two months. I wasn't sure if that would have any adverse effects, but I can't taste anything goofy. I transfered it to a keg so I could use the yeast for the dopplebock I'm brewing tomorrow. Everything is looking good so far. As for the dopplebock, I had to get a bigger cooler for the mash - 10 gallons. Turns out Elliott can fit into it nicely.

As for the kegging, I'm not sure why I waited for so long. A friend once told me this is exactly how I would feel about it. I didn't want to give up the bottles. They are easy to give away, plus it's a nice, metered serving. Think about what I just said. Easy to give away my beer and hard to drink too much. Absolute crap if you ask me.

Saturday, May 24, 2008

Brody Helps Out


The booger eater helped out today in brewing a Munich Helles. Here's the recipe:

10 lb Pilsner Malt
.5 lb Munich Malt
.25 lb Melenoidin Malt
.75 oz Liberty Hops 60 min.
German Bock Yeast (WLP 833)
Mash Temp: 150F

It came from a Jamil recipe but I had to change out the Hops from Magnum (the hops shortage strikes again) and I doubled the Melenoidin (there's just no good excuse for crappy math though). I think we'll be alright though. That is if I didn't infect the beer already. While chilling, the fitting that holds the hose to the copper tube blew out and I had a mini geyser of hose water that probably misted into the beer. I came up with a couple ways to make sure the beer would be OK. First, I thought I could bring it back up to a boil, kill off whatever fell in, rechill and call it a day. Too much work. Next, I thought since it's probably spoiled but maybe not, I could run to the store, pick up a packet of dry yeast, if it's good - great, if it's not - no biggie, I'm only out my time and about $12 worth of grain/hops. This option started to make a lot of sense because the whole purpose of this batch is to act as a big starter for the dopplebock I want to make. I would just save the yeast for the next batch. So, I discussed with Kel - that is to say I consulted the most readily available source of brewing knowledge I have. Which is pretty solid considering all the batches she's made - none. And, I was convinced that I always think I've infected my beers and they always turn out fine. Needless to say, I found a viable third option. Forget it ever happened, ride it out. If it sucks - damn. If it's good - cheers.

In the Navy, when the food wasn't all that great, they would say "...but it'll make a turd". I'm sure the same logic applies here.

Friday, May 23, 2008

Mild is Bottled

Not much more to say. Five gallons safely tucked away into bottles. Final gravity was 1.012. The hydrometer sample didn't taste like anything special. I don't put too much meaning on that though since I really don't keep it all that clean. I'm sure it will end up being a nice, easy drinking beer. We'll know for sure in a week or so. I don't think this is going to need any aging.